Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Wholesale Merchandisers LLC

Company and Product Information

Corporate Office:
Wholesale Merchandisers LLC
2929 Walker, NW
Grand Rapids, MI 49544

Website(s):  www.meijer.com

 

AutoQuest by meijer

ATF Multi-Purpose Automatic Transmission Fluid

Product: AutoQuest by meijer
Labeled: Multi-Purpose ATF

Distributed By: Wholesale Merchandisers LLC, Grand Rapids, MI
Manufactured By: Warren Oil Company, Inc., Dunn, NC

Purchased at: Richmond, IN

Date of purchase: 3/30/2017

 

Website(s): www.meijer.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with their labeled claims.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard AutoQuest
Flash Point in ºC (ASTM D92) 170/177 Min-c 219
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.0
Viscosity @40ºC, cSt (ASTM D445)   34.8
Viscosity Index (ASTM D2270) 167
Brookfield Viscosity @-40ºC mPa s (cP) 20,000 Max 14,650
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 17
Magnesium, ppm 1
Phosphorus, ppm   131
Zinc, ppm 11
Molybdenum,  ppm 0
Barium, ppm 0
Boron, ppm 40
Silicon, ppm 3
Potassium, ppm 0
Manganese, ppm 0
Titanium, ppm 0
Copper, ppm 0
Sodium, ppm 0
Vanadium, ppm 0
Contaminants
Silver, ppm 0
Aluminum, ppm 0
Chromium, ppm 0
Iron, ppm 0
Nickel, ppm 0
Lead, ppm 0
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.