Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Advanced Stores Company, Inc.

Company and Product Information

Corporate Office:
Advanced Stores Company, Inc.
CQ Sourcing
4721 Hargrove Road
Raleigh, NC 27616

Website(s): www.carquest.com

Headquartered in Roanoke, Va., Advance Auto Parts, Inc., the largest automotive aftermarket parts provider in North America, serves both the professional installer and do-it-yourself customers. As of January 3, 2015 Advance operated 5,261 stores, 111 Worldpac branches, and served approximately 1,328 independently-owned Carquest branded stores in 49 states, Puerto Rico, the Virgin Islands and Canada. Advance employs approximately 73,000 Team Members.

CarQuest
SAE 5W-20 Full Synthetic

Product: CarQuest
Viscosity Grade: SAE 5W-20
Labeled: API SN/ILSAC/dexos1

Distributed By: Advance Stores Company, Inc. for CQ Sourcing, Inc., Raleigh, NC

Purchased at: Edison, NJ

Date of purchase: 3/6/2017

 

Website(s): www.carquest.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800)

The results of the Volatility, mass % loss, 1 hr, @ 250ºC test conducted on this sample meet the requirements of API SN/ILSAC GF-5.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API SN/ILSAC GF-5.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard CarQuest
TBN, mg KOH/g (ASTM D2896) 8.22
Viscosity @ 100ºC, cSt (ASTM D445) 6.9 to <9.3 8.59
Viscosity @40ºC, cSt (ASTM D445) 49.07
Viscosity Index (ASTM D2270) 153
Viscosity @-30ºC mPa s (cP) (ASTM D5293) 6,600 Max 5,038
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max -c 12.8
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 1,969
Magnesium, ppm 12
Phosphorus, ppm 600 to 800 741
Zinc, ppm 774
Molybdenum,  ppm <1
Barium, ppm <1
Boron, ppm 3
Silicon, ppm 4
Potassium, ppm <5
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm 422
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.