PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Chevron Products Company
Company and Product Information
Corporate Office:
Chevron Products Company
6001 Bollinger Canyon Rd
San Ramon, CA 94583
Website(s): www.havoline.com
Chevron is one of the world’s leading integrated energy companies. Chevron Lubricants is a leading manufacturer of premium base oils and one of the world’s largest suppliers of finished lubricants. Depending on the country, Chevron Lubricants markets its premium lubricants under three world-class master brands: Chevron, Texaco and Caltex. Within each of these master brands are trusted product brands such as: Delo®, Havoline® and Ursa®.
Chevron Havoline Pro DS SAE 5W-20
Full Synthetic Motor Oil
Product: Chevron Havoline Pro DS
Viscosity Grade: SAE 5W-20
Labeled: API SN/ILSAC GF-5/dexos1
Manufactured By: Chevron Products Company, San Ramon, CA
Purchased at: North Las Vegas, NV
Date of purchase: 3/12/2018
Website(s): www.havoline.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value.
| PHYSICAL TESTS (click for test details) - a | Standard | Chevron Havoline ProDS |
| TBN, mg KOH/g (ASTM D2896) | 7.50 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 6.9 to <9.3 | 8.38 |
| Viscosity @40ºC, cSt (ASTM D445) | 45.66 | |
| Viscosity Index (ASTM D2270) | 162 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 3,873 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 12.4 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 2,165 | |
| Magnesium, ppm | 10 | |
| Phosphorus, ppm | 600 to 800 -d | 716 |
| Zinc, ppm | 780 | |
| Molybdenum, ppm | 56 | |
| Barium, ppm | <1 | |
| Boron, ppm | 3 | |
| Silicon, ppm | 4 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | 2 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||
