PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Chevron Products Company
Company and Product Information
Corporate Office:
Chevron Products Company
6001 Bollinger Canyon Rd
San Ramon, CA 94583
Website(s): www.havoline.com
Chevron is one of the world’s leading integrated energy companies. Through its subsidiaries that conduct business worldwide, the company is involved in virtually every facet of the energy industry. Chevron explores for, produces and transports crude oil and natural gas; refines, markets and distributes transportation fuels and lubricants; manufactures and sells petrochemicals and additives; generates power; and develops and deploys technologies that enhance business value in every aspect of the company’s operations. Chevron is based in San Ramon, Calif. More information about Chevron and Havoline is available at www.chevron.com or www.havoline.com.
Chevron Havoline
SAE 5W-30 Motor Oil
Product: Chevron Havoline
Viscosity Grade: SAE 5W-30
Labeled: API SN/ILSAC GF-5
Manufactured By: Chevron Products Company, San Ramon, CA
Purchased at: Dunn, NC
Date of purchase: 1/27/2019
Website(s): www.havoline.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | Havoline |
| TBN, mg KOH/g (ASTM D2896) | 7.51 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 10.04 |
| Viscosity @40ºC, cSt (ASTM D445) | 59.89 | |
| Viscosity Index (ASTM D2270) | 155 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 6,104 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 13.2 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 1,929 | |
| Magnesium, ppm | 41 | |
| Phosphorus, ppm | 600 to 800 -d | 645 |
| Zinc, ppm | 731 | |
| Molybdenum, ppm | 156 | |
| Barium, ppm | <1 | |
| Boron, ppm | 103 | |
| Silicon, ppm | 6 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||