PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Kendall Motor Oil c/o Phillips 66 Company
Company and Product Information
Corporate Office:
Kendall Motor Oil
c/o Phillips 66 Company
600 North Dairy Ashford Ste. CH3 Houston, TX 77079
Website(s): www.kendallmotoroil.com
Phillips 66 is a diversified energy manufacturing and logistics company. With a portfolio of Midstream, Chemicals, Refining, and Marketing and Specialties businesses, the company processes, transports, stores and markets fuels and products globally. Phillips 66 Partners, the company's master limited partnership, is an integral asset in the portfolio. Headquartered in Houston, the company has 14,600 employees committed to safety and operating excellence. Phillips 66 had $52 billion of assets as of June 30, 2017.
Kendall GT-1
SAE 5W-30 Motor Oil
Product: Kendall GT-1
Viscosity Grade: SAE 5W-30
Labeled: API SN/ILSAC GF-5/dexos1
Distributed By: Kendall Motor Oil c/o Phillips 66 Company, Houston, TX
Purchased at: Lexington, KY
Date of purchase: 12/2/2018
Website(s): www.kendallmotoroil.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | Kendall GT-1 |
| TBN, mg KOH/g (ASTM D2896) | 7.31 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 10.94 |
| Viscosity @40ºC, cSt (ASTM D445) | 63.08 | |
| Viscosity Index (ASTM D2270) | 166 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 4,714 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 11.0 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 2,037 | |
| Magnesium, ppm | 11 | |
| Phosphorus, ppm | 600 to 800 -d | 723 |
| Zinc, ppm | 791 | |
| Molybdenum, ppm | 78 | |
| Barium, ppm | <1 | |
| Boron, ppm | 229 | |
| Silicon, ppm | 4 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||