Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Klondike Lubricants Corp.

Company and Product Information

Corporate Office:
Klondike Lubricants Corp.
Langley, BC, Canada V4W 3L4

Website(s): klondikelubricants.com

KLONDIKE started under the Westec banner in 1987 as a chemical and lubricants supplier to the OEM Dealer Networks and professional service and repair facilities throughout Canada. KLONDIKE provides packaged lubricants and bulk oil delivery to various areas of the Canadian market, and it continues to expand its facilities throughout North America. Its warehousing and distribution centers have increased significantly in Vancouver, BC, and have grown to include facilities in Edmonton, AB; Winnipeg, MB; Toronto, ON; and Moncton, NB.
Source: Klondike's Website

Klondike
MD3 ATF

Product: Klondike
Labeled: MD3 ATF

Manufactured By: Klondike Lubricants Corp., Langley, BC, Canada

Purchased at: Shreveport, LA

Date of purchase: 8/6/2018

 

Website(s): klondikelubricants.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with their labeled claims.


bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard Klondike
Flash Point in ºC (ASTM D92) 170/177 Min-c 217
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.0
Viscosity @40ºC, cSt (ASTM D445)   34.1
Viscosity Index (ASTM D2270) 173
Brookfield Viscosity @-40ºC mPa s (cP) (ASTM D2983) 20,000 Max 11,451
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 9
Magnesium, ppm 2
Phosphorus, ppm   149
Zinc, ppm 5
Molybdenum,  ppm <1
Barium, ppm <1
Boron, ppm 49
Silicon, ppm 1
Potassium, ppm <1
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <1
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.