Product Tested

front label

Click above for larger image

back label

Click above for larger image

Kubota Tractor Corporation

Company and Product Information

Corporate Office:
Kubota Tractor Corporation
Grapevine, TX 76051

Website(s): www.kubotausa.com

Kubota Tractor Corporation, Grapevine, Texas, is the U.S. marketer and distributor of Kubota-engineered and manufactured machinery and equipment, including a complete line of tractors of up to 170 Gross hp, performance-matched implements, compact and utility-class construction equipment, consumer lawn and garden equipment, hay tools and spreaders, commercial turf products and utility vehicles.

Kubota®

SAE 15W-40 Engine Oil

Product: Kubota®
Viscosity Grade: SAE 15W-40
Labeled: API CK-4, CH-4, CI-4 PLUS/SN

Manufactured For: Kubota Tractor Corporation, Grapevine, TX

Purchased at: Millstone Township, NJ

Date of purchase: 6/27/2018

 

Website(s): www.kubotausa.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API CK-4/SN.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Kubota®
TBN, mg KOH/g (ASTM D2896) 9.24
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 14.9
Viscosity @40ºC, cSt (ASTM D445) 111
Viscosity Index (ASTM D2270) 139
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 6,158
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 1,909
Magnesium, ppm 427
Phosphorus, ppm 1,200 Max-c 1,077
Zinc, ppm 1,238
Molybdenum,  ppm 67
Barium, ppm <1
Boron, ppm 9
Silicon, ppm 5
Potassium, ppm 1
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm 1
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to one significant figure, therefore results up to 1,249 are considered on specification.