Product Tested

front label

Click above for larger image

back label

Click above for larger image

Ford Motor Company

Company and Product Information

Corporate Office:
Ford Motor Company
20600 Rotunda Dr.
Dearborn, MI 48124

Website(s): www.motorcraft.com

The Motorcraft autoparts division of Ford Motor Company provides replacement parts and original equipment parts (including Motorcraft motor oil.)

Ford Motorcraft®
Super Duty Formula SAE 15W-40 Diesel Motor Oil

Product: Ford Motorcraft® Super Duty Formula Diesel Motor Oil
Viscosity Grade: SAE 15W-40
Labeled: "Meets WSS-M2C171-F1, Cummins CES 20086, Detroit Diesel 93K222, Volvo VDS-4.5 and Mack EOS-4.5." and "CONTAINS MORE THAN 1000 PPM PHOSPHORUS FOR BETTER WEAR PROTECTION"

Distributed By: Ford Motor Company, Dearborn, MI

Purchased at: Piscataway, NJ

Date of purchase: 6/26/2018

 

Website(s): www.motorcraft.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the labeled specifications.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Motorcraft®
TBN, mg KOH/g (ASTM D2896) 9.25
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 15.2
Viscosity @40ºC, cSt (ASTM D445) 112
Viscosity Index (ASTM D2270) 142
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 5,488
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 1,482
Magnesium, ppm 836
Phosphorus, ppm   1,183
Zinc, ppm 1,248
Molybdenum,  ppm <1
Barium, ppm <1
Boron, ppm 106
Silicon, ppm 6
Potassium, ppm 2
Manganese, ppm <1
Titanium, ppm 2
Copper, ppm <1
Sodium, ppm 1
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 2
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.