The Data Speak for Itself...
Click above for larger image
Click above for larger image
Corporate Office:
Murphy USA
El Dorado, AR
Website(s): www.murphyusa.com
Murphy USA is a leading retailer of gasoline and convenience merchandise with more than 1,400 stations located primarily in the Southwest, Southeast and Midwest United States. The company and its team of over 9,000 employees serve an estimated 1.6 million customers each day through its network of retail gasoline stations in 26 states. The company also markets gasoline and other products at standalone stores under the Murphy Express brand. Murphy USA ranks 291 among Fortune 500 companies.
Source: Murphy USA Website
Distributed By: Murphy USA, El Dorado, AR
Purchased at: Kent, OH
Date of purchase: 9/15/2017
Website(s): www.murphyusa.com
The results of the tests conducted on this sample are consistent with their labeled claims.
Note: Although the product states it is a “Multi-Purpose Automatic Transmission Fluid,” it is important for consumers to be aware that DEXRON®-III/MERCON® fluids are not recommended for use in General Motors vehicles built after model year 2005 and Ford vehicles after model year 2006. Further, DEXRON®-III/MERCON® fluids are not recommended for use in transmissions specifying Ford Type F, Mercon® V, Mercon® SP, and GM Dexron® – VI ATF.
Always consult your owner’s manual to determine the type of ATF specified for your vehicle.
|
Physical Properties |  |
||||||
| Elemental Analysis | |
|||||||
| Labeling | |
|||||||
|
||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | Murphy USA |
| Flash Point in ºC (ASTM D92) | 170/177 Min-c | 219 |
| Viscosity @ 100ºC, cSt (ASTM D445) | 6.8 Min | 7.1 |
| Viscosity @40ºC, cSt (ASTM D445) | 34.8 | |
| Viscosity Index (ASTM D2270) | 172 | |
| Brookfield Viscosity @-40ºC mPa s (cP) | 20,000 Max | 14,124 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 2 | |
| Magnesium, ppm | 0 | |
| Phosphorus, ppm | 125 | |
| Zinc, ppm | 1 | |
| Molybdenum, ppm | 0 | |
| Barium, ppm | 0 | |
| Boron, ppm | 44 | |
| Silicon, ppm | 1 | |
| Potassium, ppm | 0 | |
| Manganese, ppm | 0 | |
| Titanium, ppm | 0 | |
| Copper, ppm | 0 | |
| Sodium, ppm | 0 | |
| Vanadium, ppm | 0 | |
| Contaminants | ||
| Silver, ppm | 0 | |
| Aluminum, ppm | 0 | |
| Chromium, ppm | 0 | |
| Iron, ppm | 0 | |
| Nickel, ppm | 0 | |
| Lead, ppm | 0 | |
| Antimony, ppm | 0 | |
| Tin, ppm | 0 | |
|
||
