Par Mar Stores Automatic Transmission Fluid "For use where DEXRON(R) III or MERCONTM Fluid is Specified"

Product Tested

Click above for larger image

Click above for larger image

Corporate Office:
Par Mar Stores
114-A Westview Avenue
Marietta, Ohio

Website(s): www.parmarstores.com

Manufactured By: Par Mar Stores, Marietta, OH

Purchased at: Beaver, PA

Date of purchase: 4/25/2018

The results of the tests conducted on this sample are consistent with their labeled claims.

Physical Properties

Elemental Analysis

Labeling

Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92) The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445) The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP) The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!

PHYSICAL TESTS (click for test details) - a	Standard	Par Mar Stores
Flash Point in ºC (ASTM D92)	170/177 Min-c	201
Viscosity @ 100ºC, cSt (ASTM D445)	6.8 Min	6.9
Viscosity @40ºC, cSt (ASTM D445)		31.7
Viscosity Index (ASTM D2270)		186
Brookfield Viscosity @-40ºC mPa s (cP)	20,000 Max	13,259

ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm		89
Magnesium, ppm		<1
Phosphorus, ppm		222
Zinc, ppm		3
Molybdenum, ppm		<1
Barium, ppm		<1
Boron, ppm		101
Silicon, ppm		4
Potassium, ppm		2
Manganese, ppm		<1
Titanium, ppm		<1
Copper, ppm		<1
Sodium, ppm		<1
Vanadium, ppm		<1
Contaminants
Silver, ppm		<1
Aluminum, ppm		<1
Chromium, ppm		<1
Iron, ppm		<1
Nickel, ppm		<1
Lead, ppm		<1
Antimony, ppm		<1
Tin, ppm		<1
Standards, shown in yellow are established by API, SAE and others. Test Method for metal analysis is ASTM D5185. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.