The Data Speak for Itself...
Click above for larger image
Click above for larger image
Corporate Office:
Industriestraße 35-53
D-22880 Wedel
Website(s): www.pentosin.com
Deutsche Pentosin Werke GmbH (Pentosin) is a manufacturer of automotive fluids used as both initial fill and service refill by over twenty-five international automotive manufacturers. CRP has been Pentosin’s NAFTA market partner since 1983, handling all sales and service activities in the United States, Canada, and Mexico. The Pentosin program includes antifreeze, brake fluid, central hydraulic/power steering fluid, motor oil, and transmission fluid.
For additional information on CRP, visit: www.crpautomotive.com
The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.
The following are the test results for the sample examined.
Manufactured by: DEUTSCHE PENTOSIN-WERKE GMBH, in Wedel, Germany
Distributed by: CRP Industries Inc. in Cranbury, NJ
Purchased at: Allison Park, PA
Date of purchase: 4/1/2015
Website(s): www.pentosin.com
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
| Elemental Analysis | |
|
| Labeling | |
Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.
| PHYSICAL TESTS (click for test details) - a | Standard | PENTO SUPER PERFORMANCE III |
| TBN, mg KOH/g (ASTM D2896) | 6.0 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 11.9 |
| Viscosity @40ºC, cSt (ASTM D445) | 69.9 | |
| Viscosity Index (ASTM D2270) | 167 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 6214 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 11.6 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium | 1595 | |
| Magnesium | 5 | |
| Phosphorus, ppm | 600 to 800 | 756 |
| Zinc, ppm | 825 | |
| Molybdenum, ppm | <1 | |
| Barium, ppm | <1 | |
| Boron, ppm | <1 | |
| Silicon, ppm | 3 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | 6 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||