Product Tested

front label

Click above for larger image

back label

Click above for larger image

SOPUS PRODUCTS

Company and Product Information

Corporate Office:
SOPUS PRODUCTS
700 Milam 
Houston, TX 77002

Website(s): www.quakerstate.com

Shell Oil Company US (SOPUS) is the United States-based subsidiary of Royal Dutch Shell. Royal Dutch Shell is one of the largest major oil companies in the world. SOPUS is a leading producer of oil and natural gas, gasoline, and petrochemical products in the US.

The company is also a leading manufacturer and marketer of motor oils and other automotive and industrial lubricants and products. In addition to Shell branded lubricants, Pennzoil-Quaker State Company, doing business as SOPUS Products, Inc., produces motor oils and other automotive products under the Pennzoil and Quaker State brand names.

Quaker State Defy High Mileage
SAE 5W-30 SYN Blend Motor Oil

Product: Quaker State Defy High Mileage
Viscosity Grade: SAE 5W-30
Labeled: API SN/ILSAC GF-5

Distributed by: SOPUS PRODUCTS, Houston, TX

Purchased at: Edison, NJ

Date of purchase: 3/12/2018

 

Website(s): www.quakerstate.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800)

The results of the Volatility, mass % loss, 1 hr, @ 250ºC test conducted on this sample meet the requirements of API SN/ILSAC GF-5.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API SN/ILSAC GF-5.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Quaker State Defy High Mileage
TBN, mg KOH/g (ASTM D2896) 8.70
Viscosity @ 100ºC, cSt (ASTM D445) 9.3 to <12.5 10.48
Viscosity @40ºC, cSt (ASTM D445) 62.96
Viscosity Index (ASTM D2270) 156
Viscosity @-30ºC mPa s (cP) (ASTM D5293) 6,600 Max 6,003
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max -c 12.0
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 2,259
Magnesium, ppm 14
Phosphorus, ppm 600 to 800 -d 766
Zinc, ppm 890
Molybdenum,  ppm 193
Barium, ppm <1
Boron, ppm 113
Silicon, ppm 4
Potassium, ppm <5
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <5
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.
  4. This specification is expressed to one significant figure, therefore results between 550 and 849 are considered on specification.