Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Race Pro Products Co.

Company and Product Information

Corporate Office:
Race Pro Products Co.
2101 E. Cooley Drive
Colton, CA 92324

Website(s): raceproproducts.com

Race Pro Products Company is a full service distribution company dedicated to serving the needs of Supermarket Chains, Convenience Store Distribution, Automotive Distributors and the Economy / Dollar Store Markets. Race Pro Products Company offers a wide array of product including motor oils, transmission fluids, brake fluids, antifreeze coolant, radiator stop leak, carburetor cleaner, starting fluid, fuel injector cleaner, octane boost, engine degreasers, gas and oil treatments. The company also provides private label packaging.

RacePro HDD
"15W-40" Motor Oil

Product: RacePro HDD
Viscosity Grade: "15W-40"
Labeled: API CJ-4/SM

Marketed By: Race Pro Products Co., Colton, CA

Purchased at: Las Cruces, NM

Date of purchase: 3/28/2017

 

Website(s): raceproproducts.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800)

The results of the Volatility, mass % loss, 1 hr, @ 250ºC test conducted on this sample meet the requirements of API CJ-4/SM.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API CJ-4/SM.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard RacePro
TBN, mg KOH/g (ASTM D2896) 10.41
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 14.79
Viscosity @40ºC, cSt (ASTM D445) 108.46
Viscosity Index (ASTM D2270) 141
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 5,522
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 13 Max -c 10.3
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 1,084
Magnesium, ppm 1,083
Phosphorus, ppm 1,200 -d 1,158
Zinc, ppm 1,263
Molybdenum,  ppm 69
Barium, ppm <1
Boron, ppm 1
Silicon, ppm 4
Potassium, ppm <5
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <5
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm 1
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 13.5 are considered on specification.
  4. This specification is expressed to two significant figures, therefore results up to 1,250 are considered on specification.