PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Race Pro Products Co.
Company and Product Information
Corporate Office:
Race Pro Products Co.
2101 E. Cooley Drive
Colton, CA 92324
Website(s): raceproproducts.com
Race Pro Products Company is a full service manufacturing and distribution company dedicated to serving the needs of Supermarket Chains, Convenience Store Distribution, Automotive Distributors and the Economy / Dollar Store Markets. Race Pro Products Company offers a complete line of products, including a wide array of motor oils, transmission fluids, brake fluids, antifreeze coolant, radiator stop leak, carburetor cleaner, starting fluid, fuel injector cleaner, octane boost, engine degreasers, gas and oil treatments. Race Pro Products Company can also provide Private Label Packaging.
Race Pro SAE 5W-20 Premium Motor Oil
Product: Race PRO Premium
Viscosity Grade: SAE 5W-20
Labeled: API SN/ILSAC GF-5
Marketed By: Race Pro Products Co., Colton, CA
Purchased at: Washington, PA
Date of purchase: 3/7/2018
Website(s): raceproproducts.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | RacePro |
| TBN, mg KOH/g (ASTM D2896) | 7.26 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 6.9 to <9.3 | 8.39 |
| Viscosity @40ºC, cSt (ASTM D445) | 47.93 | |
| Viscosity Index (ASTM D2270) | 152 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 6,135 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 13.2 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 1,985 | |
| Magnesium, ppm | 6 | |
| Phosphorus, ppm | 600 to 800 -d | 622 |
| Zinc, ppm | 726 | |
| Molybdenum, ppm | 161 | |
| Barium, ppm | <1 | |
| Boron, ppm | 87 | |
| Silicon, ppm | 4 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||
