Product Tested

front label

Click above for larger image

back label

Click above for larger image

Royal Purple, LLC

Company and Product Information

Corporate Office:
Royal Purple, LLC
One Royal Purple Lane
Porter, TX 77365

Website(s): www.royalpurple.com

Royal Purple was acquired in 2012 by Calumet Specialty Products Partners (CLMT), a leading refiner and processor of specialty hydrocarbon products headquartered in Indianapolis, IN.

Royal Purple DURALEC
Super SAE 15W-40 Diesel Motor Oil

Product: Royal Purple DURALEC
Viscosity Grade: SAE 15W-40
Labeled: API CK-4, CI-4 PLUS

Manufactured By: Royal Purple, LLC, Porter, TX

Purchased at: Plainfield, NJ

Date of purchase: 6/26/2018

 

Website(s): www.royalpurple.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API CK-4.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Royal Purple DURALEC
TBN, mg KOH/g (ASTM D2896) 8.99
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 14.3
Viscosity @40ºC, cSt (ASTM D445) 100
Viscosity Index (ASTM D2270) 147
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 4,253
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 2,420
Magnesium, ppm 9
Phosphorus, ppm 1,200 Max-c 963
Zinc, ppm 1,057
Molybdenum,  ppm <1
Barium, ppm <1
Boron, ppm <1
Silicon, ppm 6
Potassium, ppm <1
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm 3
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to one significant figure, therefore results up to 1,249 are considered on specification.