SHEETZ Multi-Purpose DM ATF

Product Tested

Click above for larger image

Click above for larger image

Sheetz, Inc.

Company and Product Information

Corporate Office:
Sheetz, Inc.
5700 6th Ave
Altoona, PA 16602

Website(s): www.sheetz.com

Established in 1952 in Altoona, Pennsylvania, Sheetz, Inc. is one of America's fastest-growing family-owned and operated convenience store chains with more than 17,500 employees. The company operates over 550 store locations throughout Pennsylvania, West Virginia, Virginia, Maryland, Ohio and North Carolina. All Sheetz convenience stores are open 24 hours a day, 365 days a year.

Product: SHEETZ
Labeled: Multi-Purpose DM

Distributed By: SHEETZ, INC., Altoona, PA
Manufactured By: Pinnacle Oil Inc., Indianapolis, IN

Purchased at: Girard, OH

Date of purchase: 5/14/2017

Website(s): www.sheetz.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with their labeled claims.

Physical Properties

Elemental Analysis

Labeling

Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92) The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445) The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP) The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.	FusionCharts XT will load here!

Note¹: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note²: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a	Standard	SHEETZ
Flash Point in ºC (ASTM D92)	170/177 Min-c	225
Viscosity @ 100ºC, cSt (ASTM D445)	6.8 Min	7.6
Viscosity @40ºC, cSt (ASTM D445)		38.3
Viscosity Index (ASTM D2270)		171
Brookfield Viscosity @-40ºC mPa s (cP)	20,000 Max	15,540

ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm		3
Magnesium, ppm		0
Phosphorus, ppm		119
Zinc, ppm		2
Molybdenum, ppm		0
Barium, ppm		0
Boron, ppm		44
Silicon, ppm		1
Potassium, ppm		3
Manganese, ppm		0
Titanium, ppm		0
Copper, ppm		0
Sodium, ppm		0
Vanadium, ppm		0
Contaminants
Silver, ppm		0
Aluminum, ppm		0
Chromium, ppm		0
Iron, ppm		0
Nickel, ppm		0
Lead, ppm		0
Antimony, ppm		0
Tin, ppm		0
Standards, shown in yellow are established by API, SAE and others. Test Method for metal analysis is ASTM D5185. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.