PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Sunoco LP
Company and Product Information
Corporate Office:
Sunoco LP
3801 West Chester Pike
Newton Square, PA 19073
Website(s): www.sunoco.com
Headquartered in Philadelphia, Pennsylvania, Sunoco is part of the Energy Transfer Partners, L.P. family of companies. Energy Transfer Partners is a New York Stock Exchange traded partnership owning and operating a diversified portfolio of energy assets.
Sunoco's Retail business markets its brand of gasoline through approximately 4,900 retail outlets in 26 states mainly east of the Mississippi, from Maine to Florida and west to Wisconsin and Louisiana. Sunoco also has more than 650 APlus branded convenience stores which are company-operated and operated by third-party dealers.
Source: Sunoco's Website
Sunoco Ultra Synthetic
SAE 5W-30 Motor Oil
Product: Sunoco Ultra Synthetic
Viscosity Grade: SAE 5W-30
Labeled: API SN/ILSAC GF-5
Manufactured For: Sunoco LP, Newton Square, PA
Purchased at: Edison, NJ
Date of purchase: 3/12/2018
Website(s): www.sunoco.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | Sunoco Ultra Synthetic |
| TBN, mg KOH/g (ASTM D2896) | 8.56 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 11.05 |
| Viscosity @40ºC, cSt (ASTM D445) | 62.60 | |
| Viscosity Index (ASTM D2270) | 170 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 4,275 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 10.2 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 1,357 | |
| Magnesium, ppm | 599 | |
| Phosphorus, ppm | 600 to 800 -d | 766 |
| Zinc, ppm | 831 | |
| Molybdenum, ppm | 85 | |
| Barium, ppm | <1 | |
| Boron, ppm | 246 | |
| Silicon, ppm | 6 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||
