Product Tested

front label

Click above for larger image

back label

Click above for larger image

Chi-Town Lubricants

Company and Product Information

Corporate Office:
Chi-Town Lubricants
Dolton, IL 60419

Website(s):No Website Found


The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.

The following are the test results for the sample examined.

SUPER XXX Platinum
10W30 Premium Motor Oil

Product: SUPER XXX Platinum
Viscosity Grade: "10W30"
Labeling: "API SM/GF-3"

Manufactured By: Chi-Town Lubricants, Dolton, IL

Purchased at: Chicago Heights, IL

Date of purchase: 11/15/2016


Website(s): No Website Found

Test Results and Assessment:

The labels on this sample refer to the product as a "Premium" and "High Performance" Motor Oil, and that it "PROTECTS AGAINST RUST AND CORROSION, DECREASES WEAR, INCREASES ENGINE LIFE, LOWERS ENGINE FRICTION AND GIVES BETTER GAS MILEAGE". Although the label suggests otherwise, the test results on this sample show a product capable of causing damage to most vehicles currently on the road.

The results of the tests conducted on this sample DO NOT meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and ARE NOT consistent with the referenced API SM Service Category. The Kinematic Viscosity @ 100°C is 19% lower than the minimum viscosity specification for this SAE grade. In addition, the low-temperature cranking viscosity is higher than the maximum viscosity specification for this grade. Furthermore, the organometallic additive levels in this sample indicate the product is NOT suitable for use in virtually all automobile engines currently on the road, and the metal analysis results indicate the product may be contaminated with used oil and abrasive material. Use of this product in automobile engines may cause harm to most vehicles currently on the road.

Note: Whereas the back label on this product displays the API Service Symbol ("Donut"), the product is not currently (2/3/2017) listed as licensed on the API website.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard SUPER XXX Platinum
TBN, mg KOH/g (ASTM D2896) 2.26
Viscosity @ 100ºC, cSt (ASTM D445) 9.3 to <12.5 7.53
Viscosity @40ºC, cSt (ASTM D445) 50.52
Viscosity Index (ASTM D2270) 112
Viscosity @-25ºC mPa s (cP) (ASTM D5293) 7,000 Max 7,302
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max -c 13.2
ELEMENTAL ANALYSIS (click for test details) - a, b
Calcium 509
Magnesium 36
Phosphorus, ppm 600 to 800 512
Zinc, ppm 553
Molybdenum,  ppm 9
Barium, ppm 3
Boron, ppm 36
Silicon, ppm 110
Potassium, ppm 9
Manganese, ppm <1
Titanium, ppm 2
Copper, ppm 16
Sodium, ppm 17
Vanadium, ppm 1
Silver, ppm <1
Aluminum, ppm 2
Chromium, ppm <1
Iron, ppm 46
Nickel, ppm <1
Lead, ppm 2
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.