Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Smitty's Supply, Inc.

Company and Product Information

Corporate Office:
Roseland, LA 70456

Website(s):www.smittysinc.net 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.

The following are the test results for the sample examined.

Super S Non-Detergent SAE 40
API SA/SB

SAE 40
Non-Detergent
API SA/SB

Manufactured By: Smitty's Supply, Inc.

Purchased at: Camden, SC 

Date of purchase: 11/17/2014

 

Website(s): www.smittysinc.net 

Test Results and Assessment:

The results of the tests conducted on this sample are NOT consistent with the API Service Category listed on the product label. This product is labeled as API Service SA which by definition should contain no additives. The metal analysis results for this sample indicate the product does contain some additives. In addition, the labels fail to give adequate warning that the API Service Category listed on the product label is OBSOLETE and is not suitable for use in most gasoline-powered automotive engines built after 1930. Use in more modern engines may cause unsatisfactory performance or equipment harm.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard Super S
TBN, mg KOH/g (ASTM D2896) 3.67
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 12.9
Viscosity @40ºC, cSt (ASTM D445) 110
Viscosity Index (ASTM D2270) 112
Viscosity @-20ºC mPa s (cP) (ASTM D5293) N/A N/A
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium 937
Magnesium 32
Phosphorus, ppm   241
Zinc, ppm 254
Molybdenum,  ppm 25
Barium, ppm 0
Boron, ppm 31
Silicon, ppm 15
Potassium, ppm 4
Manganese, ppm 0
Titanium, ppm 0
Copper, ppm 0
Sodium, ppm 39
Vanadium, ppm 0
Contaminants
Silver, ppm 0
Aluminum, ppm 0
Chromium, ppm 0
Iron, ppm 1
Nickel, ppm 0
Lead, ppm 0
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.