Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Valvoline LLC

Company and Product Information

Corporate Office:
Valvoline LLC
3499 Blazer Parkway
Lexingtom, KY

Website(s): www.valvoline.com

Valvoline International, Inc. produces, markets, and distributes automotive lubricants and chemicals for consumer, and commercial and industrial applications. The company’s consumer products include motor oil, antifreeze and radiator products, brake fluids, power steering products, automatic transmission products, fuel additives, spray lubricants, greases and gear oils, engine and parts cleaners, and maintenance products. Its commercial and industrial products comprise OEM endorsed products, heavy duty diesel engine oils, diesel exhaust fluids, natural gas engine oils, heavy duty chemicals, transmission fluids and gear oils, greases, and hydraulic and industrial oils. Source: Bloomberg

Valvoline Premium Blue
SAE 15W-40 Heavy Duty Diesel Engine Oil

Product: Valvoline Premium Blue
Viscosity Grade: SAE 15W-40
Labeled: API CK-4/SN

Marketed by: Valvoline International, Lexington, KY

Purchased at: Edison, NJ

Date of purchase: 4/3/2017

 

Website(s): www.valvoline.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800)

The results of the Volatility, mass % loss, 1 hr, @ 250ºC test conducted on this sample meet the requirements of API CK-4/SN.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API CK-4/SN.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Valvoline Premium Blue
TBN, mg KOH/g (ASTM D2896) 10.05
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 14.89
Viscosity @40ºC, cSt (ASTM D445) 113.59
Viscosity Index (ASTM D2270) 136
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 6,338
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 13 Max -c 12
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 1,453
Magnesium, ppm 620
Phosphorus, ppm 1,200 Max 1,020
Zinc, ppm 1,141
Molybdenum,  ppm 50
Barium, ppm <1
Boron, ppm 66
Silicon, ppm 7
Potassium, ppm <5
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <5
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 2
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 13.5 are considered on specification.