Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Vantage Brands LLC

Company and Product Information

Corporate Office:
Vantage Brands LLC
121 HWY 36, Suite 180
West Long Branch, NJ 07764

Website(s): 
www.thevantagebrand.com

 

Vantage ATF
Multi-Purpose D/M III

Product: Vantage ATF
Labeled: Multi-Purpose D/M III

Manufactured By: Vantage Brands LLC, West Long Branch, NJ

Purchased at: Ypsilanti, MI

Date of purchase: 11/15/2016

 

Website(s): www.thevantagebrand.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the requirements for DEXRON® III/MERCON®.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Vantage
Flash Point in ºC (ASTM D92) 170/177 Min-c 218
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.4
Viscosity @40ºC, cSt (ASTM D445)   37.1
Viscosity Index (ASTM D2270) 170
Brookfield Viscosity @-40ºC mPa s (cP) 20,000 Max 13,660
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 4
Magnesium, ppm 0
Phosphorus, ppm   135
Zinc, ppm 4
Molybdenum,  ppm 0
Barium, ppm 0
Boron, ppm 52
Silicon, ppm 3
Potassium, ppm 3
Manganese, ppm 0
Titanium, ppm 0
Copper, ppm 0
Sodium, ppm 0
Vanadium, ppm 0
Contaminants
Silver, ppm 0
Aluminum, ppm 0
Chromium, ppm 0
Iron, ppm 0
Nickel, ppm 0
Lead, ppm 0
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. Dexron® III, 170°C minimum, Mercon®, 177 °C minimum.