PETROLEUM QUALITY INSTITUTE OF AMERICA
The Data Speak for Itself...
Product Tested
Click above for larger image
Click above for larger image
Warren Oil Company, Inc.
Company and Product Information
Corporate Office:
Warren Oil Company, Inc.
Dunn, NC
Website(s): www.warrenoil.com
Warren Oil Company was started in 1976 and is headquartered in Dunn, NC. The company is a leading independent lubricant manufacturer and marketer with distribution in all 50 states and exports going to 48 countries. Warren Oil owns and operates packaging facilities in Dunn, NC, Benton, AL, San Antonio, TX, Johnstown, PA, Marion, IL, and West Memphis, AR. The company purchased three of its five plants from Pennzoil. All of Warren’s facilities are equipped to manufacture and package a diverse product slate ranging from automotive motor oils to charcoal lighter fluid.
Warren Companies manufacture and package lubricants under several proprietary registered trademarks; e.g., Warren, Lubriguard, Autoguard, Itasca, Coastal, LubriGold and Saxon.
Warren
SAE 10W-30
Synthetic Blend Motor Oil
Product: Warren Synthetic Blend
Viscosity Grade: SAE 10W-30
Labeled: API SN/LISAC GF-5
Manufactured By: Warren Oil Company, Inc., Dunn, NC
Purchased at: Ravenna, OH
Date of purchase: 9/15/2017
Website(s): www.warrenoil.com
Test Results and Assessment:
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
|
Physical Properties |  |
||||||||
| Elemental Analysis | |
|||||||||
| Labeling | |
|||||||||
|
||||||||||
Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.
| PHYSICAL TESTS (click for test details) - a | Standard | Warren |
| TBN, mg KOH/g (ASTM D2896) | 6.79 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 10.04 |
| Viscosity @40ºC, cSt (ASTM D445) | 63.89 | |
| Viscosity Index (ASTM D2270) | 143 | |
| Viscosity @-25ºC mPa s (cP) (ASTM D5293) | 7,000 Max | 4,696 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 7.9 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium, ppm | 1,902 | |
| Magnesium, ppm | 8 | |
| Phosphorus, ppm | 600 to 800 -d | 718 |
| Zinc, ppm | 788 | |
| Molybdenum, ppm | 42 | |
| Barium, ppm | <1 | |
| Boron, ppm | 198 | |
| Silicon, ppm | 5 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | <5 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | 1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||
