Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Warren Oil Company, Inc.

Company and Product Information

Corporate Office:
Warren Oil Company, Inc.
Dunn, NC

Website(s): www.warrenoil.com

Warren Oil Company was started in 1976 and is headquartered in Dunn, NC. The company is a leading independent lubricant manufacturer and marketer with distribution in all 50 states and exports going to 48 countries. Warren Oil owns and operates packaging facilities in Dunn, NC, Benton, AL, San Antonio, TX, Johnstown, PA, Marion, IL, and West Memphis, AR. All of Warren’s facilities are equipped to manufacture and package a diverse product slate ranging from automotive motor oils to charcoal lighter fluid. 

Warren Companies manufacture and package lubricants under several proprietary registered trademarks; e.g., Warren, Lubriguard, Autoguard, Itasca, Coastal, LubriGold and Saxon.

Warren Multi-Purpose DexMerc® ATF

Product: Warren
Labeled: Multi-Purpose DexMerc® ATF

Manufactured By: Warren Oil Company, Inc., Dunn, NC

Purchased at: Newton Falls, OH

Date of purchase: 9/15/2017

 

Website(s): www.warrenoil.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with their labeled claims.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Warren®
Flash Point in ºC (ASTM D92) 170/177 Min-c 217
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.1
Viscosity @40ºC, cSt (ASTM D445)   33.8
Viscosity Index (ASTM D2270) 180
Brookfield Viscosity @-40ºC mPa s (cP) 20,000 Max 12,338
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 0
Magnesium, ppm 0
Phosphorus, ppm   130
Zinc, ppm 0
Molybdenum,  ppm 0
Barium, ppm 0
Boron, ppm 49
Silicon, ppm 2
Potassium, ppm 2
Manganese, ppm 0
Titanium, ppm 0
Copper, ppm 0
Sodium, ppm 0
Vanadium, ppm 0
Contaminants
Silver, ppm 0
Aluminum, ppm 0
Chromium, ppm 0
Iron, ppm 0
Nickel, ppm 0
Lead, ppm 0
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.