Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Wolf's Head Motor Oil Company

Company and Product Information

Corporate Office:
Wolf's Head Motor Oil Company
1601 McCloskey Blvd.
Tampa, FL 33605

Website(s): www.wolfshead.com

The Wolf’s Head brand name has been in the market for close to a century with roots in Pennsylvania crude. Whereas the trademark was originally registered to Pennzoil in 1976, it is now registered to Amalie AOC. LTD in Tampa Florida.

Wolf's Head
DX III-H/M ATF

Product: Wolf's Head
Labeled: DX III-H/M ATF

Manufactured By: Wolf's Head Oil Company, Tampa, FL

Purchased at: New Brighton, PA

Date of purchase: 10/5/2018

 

Website(s): www.wolfshead.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with DEXRON®-III/MERCON® transmission fluids.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard Wolf's Head
Flash Point in ºC (ASTM D92) 170/177 Min-c 217
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.7
Viscosity @40ºC, cSt (ASTM D445)   38.2
Viscosity Index (ASTM D2270) 176
Brookfield Viscosity @-40ºC mPa s (cP) 20,000 Max 16,869
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 142
Magnesium, ppm 26
Phosphorus, ppm   200
Zinc, ppm 39
Molybdenum,  ppm <1
Barium, ppm <1
Boron, ppm 59
Silicon, ppm 4
Potassium, ppm <1
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <1
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm 2
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.