Product Tested

front label

Click above for larger image

back label

Click above for larger image


Company and Product Information

Corporate Office:
P.O. Box 928
Glenview, IL 60025

Website(s): No Website Found


The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.

The following are the test results for the sample examined.

Xpress Lube Pro
"5W-30" Motor Oil

Viscosity Grade: "5W-30"
Labeling: No API Listed

Manufactured By: XPRESS LUBE PRO, Glenview, IL

Purchased at: Chicago Heights, IL

Date of purchase: 11/30/2016


Website(s): No Website Found

Test Results and Assessment:

The results of the tests conducted on this sample do NOT meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are NOT consistent with any definition of motor oil. The Kinematic Viscosity @ 100°C is 61% lower than the minimum viscosity specification for this SAE grade, and the Low-Temperature Cranking Viscosity is sufficiently low to indicate the sample should be labeled with a lower SAE W Grade than that listed on the product label. In addition, the organometallic additive levels in this sample indicate the product is NOT suitable for use in the majority of automobile engines currently on the road, and the metal analysis results for this sample indicate the product may be contaminated with used oil and abrasive material.

Use of this product in automobile engines will likely cause harm to the engine.

Note: This product has been ordered off the shelves in the state Missouri.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard XPRESS LUBE PRO
TBN, mg KOH/g (ASTM D2896) 1.51
Viscosity @ 100ºC, cSt (ASTM D445) 9.3 to <12.5 3.6
Viscosity @40ºC, cSt (ASTM D445) 16.3
Viscosity Index (ASTM D2270) 102
Viscosity @-30ºC mPa s (cP) (ASTM D5293) 6,600 Max 1,465
ELEMENTAL ANALYSIS (click for test details) - a, b
Calcium 67
Magnesium 4
Phosphorus, ppm 167
Zinc, ppm 100
Molybdenum,  ppm 0
Barium, ppm 10
Boron, ppm 2
Silicon, ppm >999
Potassium, ppm 9
Manganese, ppm 3
Titanium, ppm 0
Copper, ppm 2
Sodium, ppm 3
Vanadium, ppm 0
Silver, ppm 0
Aluminum, ppm 12
Chromium, ppm 0
Iron, ppm 107
Nickel, ppm 1
Lead, ppm 3
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.